Ricevitore SDR wideband modello SDRPLAY USATO

100.00EUR

Ricevitore SDRplay  da 10 KHz a USATO un paio di volte

come comprarlo nuovo

In dotazione viene fornito il cavo USB ed un dischetto contenente i driver del dispositivo

The SDRplay RSP is a powerful wideband full-featured Software Defined Receiver which covers all frequencies from 10kHz up to 2 GHz.

All it needs is a PC (Supported Platforms: Windows, Linux, Mac, Raspberry Pi 2/3 & Android) along with an appropriate antenna to provide excellent communications receiver functionality. Combined that with the power of readily available SDR receiver software and you are on your way to enjoy all modes of operation while monitoring up to 10MHz of spectrum at a time.

What's really exciting is that SDRplay offers an open API, allowing developers to create new demodulators or applications around the platform.

Amateur Radio Operators will enjoy all modes of operation for the Ham Bands ranging from experimental LF, through all the HF bands, VHF, UHF and up to the 23cm band.

With the SRDplay RSP general coverage receiver, you can enjoy exploring the rest of the RF spectrum as well!

 

Key Features:

  • Robust and strong plastic case
  • Continuous coverage from 10kHz to 2 GHz
  • 12-bit ADC silicon technology (not another 8-bit dongle!)
  • Built-in High-Performance front-end filters
  • Up to 10 MHz bandwidth
  • Good sensitivity and selectivity
  • Low noise floor
  • Simple USB interface (type B socket)
  • SMA antenna socket
  • Powers over the USB cable

Key Benefits: 

  • Ideal for portable operation
  • No need for an up-converter
  • Covers all amateur bands from experimental LF through HF, VHF and UHF
  • Simultaneous entire amateur band monitoring possible
  • Works with all the popular SDR software (HDSDR, SDR-Console, CubicSDR, SDR#)
  • Compatible with existing open source radio software
  • ExtIO based plugin available
  • Compatible with Mirics Radio & TV software
  • Software upgradeable for future standards
  • Strong and growing software support network
  • API provided to allow demodulator or application development
  • Multiplatform support including Windows, Linux, Mac and Android
  • Now includes SDRuno SDR software! (equivalent to Studio1)

Important Note:
This unit does not include USB cable, antenna connectors, coax cable or antenna -> see accessories below for USB cable and antenna adaptors   

 

Specifications:

  • Frequency range: 10kHz - 2 GHz
  • Bandwidth: 10MHz
  • Connectivity:
    • USB 2.0 (high speed) type B socket for signalling and power
    • SMA RF (female socket)
  • Intermediate Frequency Modes:
    • Zero IF, all IF bandwidths
    • Low IF, IF bandwidths <1.536MHz
  • IF Bandwidth supported:
    • 200 kHz
    • 300 kHz
    • 600 kHz
    • 1.536 MHz
    • 5 MHz
    • 6 MHz
    • 7 MHz
    • 8 MHz
  • Front-end Filtering:

   Automatically configured:

  • 12 MHz Low Pass Filter
  • 12 – 30 MHz Band Pass Filter
  • 30 – 60 MHz Band Pass Filter
  •  60 – 120MHz Band Pass Filter
  •  120 – 250 MHz Band Pass Filter
  •  250 – 420 MHz Band Pass Filter
  •  420 – 1000 MHz Band Pass Filter
  • 1000 MHz High Pass Filter
  • ADC characteristics:
    • 12-bit native ADC
    •  Sample Frequency 2MSPS – 10.66MSPS
    •  10.4 ENOB
    •  60dB SNR
    •  67dB SFDR
  • Weight: 110g
  • Size: 95x80x30mm

 

Full documentation, software and support available via www.sdrplay.com

For more info regarding software available for your  RSP, visit www.sdrplay.com/platforms.htmlThe SDRplay RSP is a powerful wideband full-featured Software Defined Receiver which covers all frequencies from 10kHz up to 2 GHz.

All it needs is a PC (Supported Platforms: Windows, Linux, Mac, Raspberry Pi 2/3 & Android) along with an appropriate antenna to provide excellent communications receiver functionality. Combined that with the power of readily available SDR receiver software and you are on your way to enjoy all modes of operation while monitoring up to 10MHz of spectrum at a time.

What's really exciting is that SDRplay offers an open API, allowing developers to create new demodulators or applications around the platform.

Amateur Radio Operators will enjoy all modes of operation for the Ham Bands ranging from experimental LF, through all the HF bands, VHF, UHF and up to the 23cm band.

With the SRDplay RSP general coverage receiver, you can enjoy exploring the rest of the RF spectrum as well!

 

Key Features:

  • Robust and strong plastic case
  • Continuous coverage from 10kHz to 2 GHz
  • 12-bit ADC silicon technology (not another 8-bit dongle!)
  • Built-in High-Performance front-end filters
  • Up to 10 MHz bandwidth
  • Good sensitivity and selectivity
  • Low noise floor
  • Simple USB interface (type B socket)
  • SMA antenna socket
  • Powers over the USB cable

Key Benefits: 

  • Ideal for portable operation
  • No need for an up-converter
  • Covers all amateur bands from experimental LF through HF, VHF and UHF
  • Simultaneous entire amateur band monitoring possible
  • Works with all the popular SDR software (HDSDR, SDR-Console, CubicSDR, SDR#)
  • Compatible with existing open source radio software
  • ExtIO based plugin available
  • Compatible with Mirics Radio & TV software
  • Software upgradeable for future standards
  • Strong and growing software support network
  • API provided to allow demodulator or application development
  • Multiplatform support including Windows, Linux, Mac and Android
  • Now includes SDRuno SDR software! (equivalent to Studio1)

Important Note:
This unit does not include USB cable, antenna connectors, coax cable or antenna -> see accessories below for USB cable and antenna adaptors   

 

Specifications:

  • Frequency range: 10kHz - 2 GHz
  • Bandwidth: 10MHz
  • Connectivity:
    • USB 2.0 (high speed) type B socket for signalling and power
    • SMA RF (female socket)
  • Intermediate Frequency Modes:
    • Zero IF, all IF bandwidths
    • Low IF, IF bandwidths <1.536MHz
  • IF Bandwidth supported:
    • 200 kHz
    • 300 kHz
    • 600 kHz
    • 1.536 MHz
    • 5 MHz
    • 6 MHz
    • 7 MHz
    • 8 MHz
  • Front-end Filtering:

   Automatically configured:

  • 12 MHz Low Pass Filter
  • 12 – 30 MHz Band Pass Filter
  • 30 – 60 MHz Band Pass Filter
  •  60 – 120MHz Band Pass Filter
  •  120 – 250 MHz Band Pass Filter
  •  250 – 420 MHz Band Pass Filter
  •  420 – 1000 MHz Band Pass Filter
  • 1000 MHz High Pass Filter
  • ADC characteristics:
    • 12-bit native ADC
    •  Sample Frequency 2MSPS – 10.66MSPS
    •  10.4 ENOB
    •  60dB SNR
    •  67dB SFDR
  • Weight: 110g
  • Size: 95x80x30mm

 

Full documentation, software and support available via www.sdrplay.com

For more info regarding software available for your  RSP, visit www.sdrplay.com/platforms.htmlThe SDRplay RSP is a powerful wideband full-featured Software Defined Receiver which covers all frequencies from 10kHz up to 2 GHz.

All it needs is a PC (Supported Platforms: Windows, Linux, Mac, Raspberry Pi 2/3 & Android) along with an appropriate antenna to provide excellent communications receiver functionality. Combined that with the power of readily available SDR receiver software and you are on your way to enjoy all modes of operation while monitoring up to 10MHz of spectrum at a time.

What's really exciting is that SDRplay offers an open API, allowing developers to create new demodulators or applications around the platform.

Amateur Radio Operators will enjoy all modes of operation for the Ham Bands ranging from experimental LF, through all the HF bands, VHF, UHF and up to the 23cm band.

With the SRDplay RSP general coverage receiver, you can enjoy exploring the rest of the RF spectrum as well!

 

Key Features:

  • Robust and strong plastic case
  • Continuous coverage from 10kHz to 2 GHz
  • 12-bit ADC silicon technology (not another 8-bit dongle!)
  • Built-in High-Performance front-end filters
  • Up to 10 MHz bandwidth
  • Good sensitivity and selectivity
  • Low noise floor
  • Simple USB interface (type B socket)
  • SMA antenna socket
  • Powers over the USB cable

Key Benefits: 

  • Ideal for portable operation
  • No need for an up-converter
  • Covers all amateur bands from experimental LF through HF, VHF and UHF
  • Simultaneous entire amateur band monitoring possible
  • Works with all the popular SDR software (HDSDR, SDR-Console, CubicSDR, SDR#)
  • Compatible with existing open source radio software
  • ExtIO based plugin available
  • Compatible with Mirics Radio & TV software
  • Software upgradeable for future standards
  • Strong and growing software support network
  • API provided to allow demodulator or application development
  • Multiplatform support including Windows, Linux, Mac and Android
  • Now includes SDRuno SDR software! (equivalent to Studio1)

Important Note:
This unit does not include USB cable, antenna connectors, coax cable or antenna -> see accessories below for USB cable and antenna adaptors   

 

Specifications:

  • Frequency range: 10kHz - 2 GHz
  • Bandwidth: 10MHz
  • Connectivity:
    • USB 2.0 (high speed) type B socket for signalling and power
    • SMA RF (female socket)
  • Intermediate Frequency Modes:
    • Zero IF, all IF bandwidths
    • Low IF, IF bandwidths <1.536MHz
  • IF Bandwidth supported:
    • 200 kHz
    • 300 kHz
    • 600 kHz
    • 1.536 MHz
    • 5 MHz
    • 6 MHz
    • 7 MHz
    • 8 MHz
  • Front-end Filtering:

   Automatically configured:

  • 12 MHz Low Pass Filter
  • 12 – 30 MHz Band Pass Filter
  • 30 – 60 MHz Band Pass Filter
  •  60 – 120MHz Band Pass Filter
  •  120 – 250 MHz Band Pass Filter
  •  250 – 420 MHz Band Pass Filter
  •  420 – 1000 MHz Band Pass Filter
  • 1000 MHz High Pass Filter
  • ADC characteristics:
    • 12-bit native ADC
    •  Sample Frequency 2MSPS – 10.66MSPS
    •  10.4 ENOB
    •  60dB SNR
    •  67dB SFDR
  • Weight: 110g
  • Size: 95x80x30mm

 

Full documentation, software and support available via www.sdrplay.com

For more info regarding software available for your  RSP, visit www.sdrplay.com/platforms.html

 

All'interno del materiale usato da noi venduto troverete una cartolina con indicate le condizioni di garanzia dell'oggetto che riporta testualmente : "Il presente certificato accompagna l’apparecchiatura e deve essere riconsegnato in caso di riparazione. La garanzia è di 24 mesi su prodotti nuovi e di 12 mesi sui prodotti usati, e dovrà essere accompagnato da documento di acquisto. La garanzia non include danni provocati da: — uso improprio o maldestro dell’apparecchiatura (caduta manomissioni, modifiche di espansioni di banda, inversione di polarità, tensione errata di alimentazione, disadattamenti di antenna, uso non conforme al manuale etc. — eventi atmosferici (esempio fulmini, cariche elettrostatiche, sovratensioni etc); — interventi da parte di tecnici non autorizzati — transistor finali di potenza, componenti danneggiati da fluidi corrosivi batterie o altri agenti chimici; — danni da ricarica con caricabatteria non originali; — parti soggetto ad usura ( in particolar modo display, potenziometri, trasformatori ed altro). La Garanzia sull’usato è NOMINALE , quindi l’apparecchio deve esserci recapitato direttamente dall’acquirente dell’apparato stesso. La garanzia su apparecchi usati ha valore solo se l’apparecchio stesso presenterà il sigillo di garanzia perfettamente integro, pena l’immediata decadenza della garanzia stessa.

Share Ricevitore SDR wideband modello SDRPLAY USATO on Facebook
Da inserire:

  • Model: SDPLAY USATO
  • Shipping Weight: 1kg.
  • 1 Units in Stock


This product was added to our catalog on lunedì 31 ottobre, 2016.
facebook twitter google+ youtube yahoo orkut
cc pagamenti

Copyright © 2025 MPX ELETTRONICA S.R.L. - P.I. 04000300717 Powered by Zen Cart - Il tuo indirizzo IP è: 18.97.9.168