SB-2000 Mk2 USB Transceiver Interface

84.00EUR

 

width=420

Nuova Versione!

SB-2000 Mk2: Scheda audio e interfaccia CAT controllata via USB.
SB-2000 Mk2 é un'economica interfaccia per radio con connettore USB. (USB 1.1 e USB 2.0 full speed sono supportate). Non vi é più bisogno di avere le porte seriali e parallele sul vostro computer. L'interfaccia consente il controllo del PTT, FSK e della manipolazione CW via CAT e l'interfacciamento per la scheda audio per i modi digitali: RTTY, PSK32, SSTV, FAX etc. (utilizzando la scheda audio del vostro computer).

La nuova versione di 'Mk2' dell'interfaccia SB-2000 ora supporta due porte seriali virtuali! Questo è molto utile in quanto non tutti i programmi per computer in grado di supportare le funzioni miste come PTT e CW, più CAT sulla stessa porta seriale. Con la nuova versione si dispone di due porte seriali virtuali, una per PTT e CW / FSK, e un'altra porta per il controllo CAT.

Tutti i segnali sono disaccoppiati galvanicamente mediante trasformatori. L'alimentazione viene presa dalla porta USB del computer. Nella confezione troverete il CD con i driver USB per Win 2000, XP, Vista e Win7. Mac OSX e Linux sono supportati senza alcuna installazione del driver. Dimensioni: 130x75x45mm.

Il kit di cavi (venduto separatamente) contiene tutti i cavi necessari per connettersi alla radio (CAT e dati, USB e audio per il computer). L'SB-2000 Mk2 include un convertitore di livello da RS-232 a USB, consentendo l'utilizzo delle radio munite di interfaccia RS-232 (FT-1000, FT-2000, FT-450, FT-950 etc.). La connessione con la radio é realizzata con un cavo che adesso consente la manipolazione in CW.

Cable Sets

  • SB2K-IC13 per tutti con ACC-13: IC-718, IC-703, IC-706, IC-7000, IC-7100
  • SB2K-IC8 per tutti Icom con ACC-8: IC-746, IC-7400, IC-756xxx, IC-7600, IC-7700, IC-7800 and practically all recent Icom desktop radios
  • SB2K-KW8 per Kenwood TS-480SAT e TS-480HX
  • SB2K-KW13 per Kenwood TS-570 e TS-2000
  • SB2K-FTMINI8 per Yaesu FT-100, FT-817, FT-857, FT-897
  • SB2K-FT450 per Yaesu FT-450 e FT-950 e FT-DX3000D
  • SB2K-FT2000 per Yaesu FT-1000MP (MkV, MkV Field), FT-2000, FT-DX9000
Note: Some radios which support HF and VHF (e.g. IC-746, IC-7400) do have separate PTT lines for HF (HSEND) and VHF (VSEND). The SB-2000 keys only the HSEND line, so without modification it is useable on HF only. To use the interface on VHF/UHF as well, you need to modify the radio or interface connector to key HSEND and VSEND simultanously (bridge HSEND and VSEND). Radios like the IC-706Mk2G and IC-7000 needs to have a menu item set, so HSEND also keys the Tx on VHF and UHF.
Note on using the SB-2000 with the Icom IC-7000:
The cable SB2K-IC13 has an internal bridge between the keying lines for FSK and CW. This allows the keying with just one line, the RTS signal, and works just fine with the IC-706, IC-7200 etc. But with the IC-7000 a high current is seen over these lines. The effect is that the fan starts immediately after plugging in the cable. In rare cases the IC-7000 might be damaged.

Quick solution: Don't plug in the CW connector from the SB-2000 to the IC-7000. The renders the interface inoperable for telegraphy. Other modes like PSK31, RTTY etc. are not affected.

Da inserire:

  • Model: SB-2000 MK2 USB
  • Shipping Weight: 0.5kg.
  • 3 Units in Stock


This product was added to our catalog on sabato 07 dicembre, 2013.

facebook twitter google+ youtube yahoo orkut
cc pagamenti

Copyright © 2024 MPX ELETTRONICA S.R.L. - P.I. 04000300717 Powered by Zen Cart - Il tuo indirizzo IP è: 34.229.17.20